Bullnose Cornerbead are steel corners that have 5/8" nailing flanges and come in 8' lengths. Bullnose Corners have a 3/4" radius and fit 90° corners. Bullnose Corners have fastening holes along the flange to assist in their attachment to the gypsum board. The drywall must be kept back a 1/4" from the corner of the framing to allow for the curve of the bullnose corner. Bullnose corners provide a smooth transition from one wall to another, thus creating a softer look and feel versus standard square cornerbead. Bullnose Corners come 25 pieces in a box.

Splayed (or Open Angle) Bullnose Cornerbead is a steel trim perfect for two walls that meet and create a 135° Outside Corner. It allows for a rounded corner look even at walls that do not meet at a 90° Angle. 135° Splay Bullnose has a flange width of 5/8" and comes in 8' lengths. Bullnose Corners have fastening holes along the flange to assist in their attachment to the gypsum board. The drywall must be kept back a 1/4" from the corner of the framing to allow for the curve of the bullnose corner. Splayed Bullnose Corners come 25 pieces in a box.

Bullnose Kerf is a steel trim for transitioning from drywall to a door or window frame. It allows the installer to maintain the "rounded" look of a bullnose cornerbead around a door or window frame. The Bullnose Kerf trim has a 7/8" fastening flange with a taping bead for easy finishing. The other flange on the Bullnose Kerf is a 3/16" flange, which is inserted into a notch that must be cut out of the door or window frame. Kerf has fastening holes along the flange to assist in its attachment to the gypsum board. The drywall must be kept back a 1/4" from the corner of the framing to allow for the curve of the Bullnose Kerf corner. Bullnose Kerf comes in 8’ lengths with 25 pieces in a box.

Bullnose Door & Window Trim is a steel product, which allows you to have a clean and smooth Bullnose transition between drywall and your doors or windows. The Bullnose Door & Window Trim comes in both a 1/2" and a 5/8" width (to fit ½” or 5/8” Drywall) and is slid over the edge of the drywall. While the fastening flange has a tapeable edge for taping compound, the other flange tucks in between the drywall and the framing. Bullnose Door and Window Trim comes in 8’ lengths with 15 pieces in a box.

Metal Fast Mask® is a taper's dream come true. While many drywall trims need to be masked before mud, tape, and paint can be applied, Fast Mask® requires no such step. Fast Mask® has a built in masking strip that only needs to be pulled once the drywall and paint job is complete.  By cutting one of the most tedious steps out of the installation of drywall trim, Fast Mask® reduces the contractor's costs.

Metal Fast Mask® is a steel 1/2" L Metal that can be used around doors; windows, acoustic ceilings, concrete walls, and anywhere you wish to terminate drywall. Fast Mask is also known by some as a “Zip Strip”. Metal Fast Mask comes in 8’ lengths with 15 pieces in a box.

Steel Shadow Mold is a transition trim that finishes off a drywall edge and creates a reveal at a dissimilar product such as a floor, ceiling, door or window frame. Steel Shadow Mold has a beveled nailing flange to allow for tape and mud to be tapered up to its edge. It has a 1/2" deep shadow, which can be used with both 1/2" and 5/8" drywall board. Steel Shadow Mold is available with either a 1/2" or 3/4" reveal. Steel Shadow Mold comes in 8’ lengths with 25 pieces in a box.

Drywall Reveals are extruded aluminum trims that come in 8' lengths with a standard Mill Finish for field priming and painting. Drywall Reveals are an aesthetic trim that breaks up a typical drywall finish. It comes with attachment flanges on each side of a “U-Channel” that can be taped to gypsum board. Aluminum Drywall Reveals come in various sizes. If you need a size that is not listed below, contact us for pricing.

Drywall F Molds are extruded aluminum trims that come in 8’ lengths with a standard Mill Finish for field Priming and painting. Drywall F Molds are transition trims that finish off drywall edges and creates a reveal at dissimilar products such as floors, ceilings, door or window frames. Aluminum Drywall F Molds come in various sizes. If you need a size that is not listed below, contact us for pricing.

Aluminum Drywall Shadow Molds are extruded aluminum trims that come in 8’ lengths with a standard Mill Finish for field Priming and painting. Drywall Shadow Molds are transition trims that finish off drywall edges and creates a reveal at dissimilar products such as floors, ceilings, door or window frames. Aluminum Drywall Shadow Molds come in various sizes. If you need a size that is not listed below, contact us for pricing.